Created on an 'Axe-Fx ll - Mark 1' and an 'Ernie Ball Music Man' 'Axis' guitar with stock 'Humbucker' pickups through a 20-ft long cable.
Uses 'Pitch' block #2 to drop the tuning down a 1/2-step for standard A-440 tuned guitars. Bypass or delete this block if you are already tuned down or wish to stay in standard tuning. If you make any of these changes, you will also have to change the 'Key' parameter in 'Pitch' block #1 to match the 'key' that you plan to play the song in.
This 'Tone Matched' 'IR' is a 50/50 blend between the 'Tone Match' and my 'M/H75+SB (Moke) IR'. The 'Tone Matched' 'IR' alone was very accurate but way too thin for live use. The blended 'IR' gives the vibe of the 'studio' tone, but with the fullness of a 'live' tone.
Includes 1 free non-commercial user cab IR that can to be installed into the same user slot as the downloaded preset (if currently unused) or any slot that you wish.
Cab #1 (X) Left and Right both use the 'Detroit (Moke) 'IR....('User Cab' slot U:079)
Includes Two versions of the preset.
One Preset with 1 'External Controller'........
External #1 - Main volume (Vol/Pan 1)
One Preset with (nec) added to the name with 'No External Controllers' for ease of use.
Scene #1....Main rhythm.
Scene #2....Main rhythm with harmonies added (a 5th and 1 octave above) for the intro.
Scene #3....Solo, last section. Adds a pre and post boost. Adds an octave and a 3rd above.
Scene #4....Solo, first section. Adds a pre and post boost. Adds an octave above.
Scenes #5 through #8 are not used.
'Pitch' block #1 (Y) is setup to use 2 'Global' scales........#29 and #30 (if those slots are being used in your device, you can program these scales into two other 'Global' scale locations and set 'Pitch' block 1 (X) 'Voice Scale 1 and 2' to use those new 'Global' scale numbers)
These scales are programmed manually in the 'Global' menu (not in the 'Pitch' block)
Uses 'Pitch' block #2 to drop the tuning down a 1/2-step for standard A-440 tuned guitars. Bypass or delete this block if you are already tuned down or wish to stay in standard tuning. If you make any of these changes, you will also have to change the 'Key' parameter in 'Pitch' block #1 to match the 'key' that you plan to play the song in.
This 'Tone Matched' 'IR' is a 50/50 blend between the 'Tone Match' and my 'M/H75+SB (Moke) IR'. The 'Tone Matched' 'IR' alone was very accurate but way too thin for live use. The blended 'IR' gives the vibe of the 'studio' tone, but with the fullness of a 'live' tone.
Includes 1 free non-commercial user cab IR that can to be installed into the same user slot as the downloaded preset (if currently unused) or any slot that you wish.
Cab #1 (X) Left and Right both use the 'Detroit (Moke) 'IR....('User Cab' slot U:079)
Includes Two versions of the preset.
One Preset with 1 'External Controller'........
External #1 - Main volume (Vol/Pan 1)
One Preset with (nec) added to the name with 'No External Controllers' for ease of use.
Scene #1....Main rhythm.
Scene #2....Main rhythm with harmonies added (a 5th and 1 octave above) for the intro.
Scene #3....Solo, last section. Adds a pre and post boost. Adds an octave and a 3rd above.
Scene #4....Solo, first section. Adds a pre and post boost. Adds an octave above.
Scenes #5 through #8 are not used.
'Pitch' block #1 (Y) is setup to use 2 'Global' scales........#29 and #30 (if those slots are being used in your device, you can program these scales into two other 'Global' scale locations and set 'Pitch' block 1 (X) 'Voice Scale 1 and 2' to use those new 'Global' scale numbers)
These scales are programmed manually in the 'Global' menu (not in the 'Pitch' block)