'Wish You Were Here' V3.3 - For Humbucker Pickups (Axe-Fx ll)
SKU:
$10.00
$10.00
per item
A 'Tone Matched' preset for the song 'Wish You Were Here' by 'Pink Floyd'
Contains an 'Acoustic Guitar Simulation' that converts the sound of the 'bridge' humbucker pickup on an electric guitar into a reasonably realistic 6 and 12- string acoustic guitar sound.
Updated for Q10.01
Contains an 'Acoustic Guitar Simulation' that converts the sound of the 'bridge' humbucker pickup on an electric guitar into a reasonably realistic 6 and 12- string acoustic guitar sound.
Updated for Q10.01
As each guitar/pickup combination sounds different. The resulting 'Acoustic' 'Tone Match' can also sound different. Increase the 'Dephase' parameter in Cab block #2 to shape the tone and reduce any excessive 'comb filtering'. Try out all of the 'Mic' models in the Cab block as well. Also adjusting the 'Tone' knob or your guitar (if equipped) can yield a more natural 'Acoustic' sound.
Created on an 'Axe-Fx ll - Mark 1' and an 'Ernie Ball Music Man' 'Axis' guitar with stock 'Humbucker' pickups through a 20-ft long cable.
Dialed in using the Bridge pickup.
New for Q10.01... Now available in three different versions. For 'High Output Humbucker Pickups' (the original version), 'Medium Output Humbucker Pickups' and 'Low Output Humbucker Pickups'.
Try all three versions to see which one works best for you. You can also mix and match them to work with multiple guitars.
Any included 'Custom' IRs should be imported into the same 'User Cab' slot(s) (if currently unused) listed below. If the 'User Cab' slot(s) are being used in your unit, you can use any other slot(s) that you wish. But you must go to the Cab block(s) in the preset and set them to use the new slots that you are now using.
Cab #1 (X) uses the 'Wish You Were Here intro (Moke)' IR....('User Cab' slot U:017)
Cab #2 (X) uses the 'Moke's Acoustic V3' IR....('User Cab' slot U:013)
Includes two versions of the preset.
The 'Regular' versions use 1 'External Controller'........
External #1 – Main volume (via Vol/Pan block 1)
The Presets with (nec) added to the name use 'No External Controllers', for ease of use.
Everything is automated and should work as intended through the scene changes.
Arm the 'Record' button in the Looper, it should only start recording once you start the opening phrase. When you switch to scene 2, the Looper should start. When you finish the Acoustic solo and switch to scene 3 on the 'C' chord as the vocals start, the Looper will stop and mute, the opening 12-string tone will accompany the Acoustic tone at the normal volume, then automatically fade to a lower volume (like the original recording), and stay there.
Scene #1....12-string (filtered) Acoustic intro w/crackling sound (panned 65% right). Use the 'Looper' to record the first approx. 35 seconds. Once 'Record' is armed, the 'Looper' will automatically start recording when the first note is struck.
Scene #2....Acoustic sim. Automatically starts the 'Looper via scene controller #1. Turns down the 'Crackling' sound via scene controller #2.
Scene #3....Scenes 1 and 2 combined. Switch at 1:15. Mutes the 'Looper' block.
Scene #4....Solo. 12-string (filtered) Acoustic sim (panned center) and Acoustic sim together.
Scenes #5 through #8 are not used.
Created on an 'Axe-Fx ll - Mark 1' and an 'Ernie Ball Music Man' 'Axis' guitar with stock 'Humbucker' pickups through a 20-ft long cable.
Dialed in using the Bridge pickup.
New for Q10.01... Now available in three different versions. For 'High Output Humbucker Pickups' (the original version), 'Medium Output Humbucker Pickups' and 'Low Output Humbucker Pickups'.
Try all three versions to see which one works best for you. You can also mix and match them to work with multiple guitars.
Any included 'Custom' IRs should be imported into the same 'User Cab' slot(s) (if currently unused) listed below. If the 'User Cab' slot(s) are being used in your unit, you can use any other slot(s) that you wish. But you must go to the Cab block(s) in the preset and set them to use the new slots that you are now using.
Cab #1 (X) uses the 'Wish You Were Here intro (Moke)' IR....('User Cab' slot U:017)
Cab #2 (X) uses the 'Moke's Acoustic V3' IR....('User Cab' slot U:013)
Includes two versions of the preset.
The 'Regular' versions use 1 'External Controller'........
External #1 – Main volume (via Vol/Pan block 1)
The Presets with (nec) added to the name use 'No External Controllers', for ease of use.
Everything is automated and should work as intended through the scene changes.
Arm the 'Record' button in the Looper, it should only start recording once you start the opening phrase. When you switch to scene 2, the Looper should start. When you finish the Acoustic solo and switch to scene 3 on the 'C' chord as the vocals start, the Looper will stop and mute, the opening 12-string tone will accompany the Acoustic tone at the normal volume, then automatically fade to a lower volume (like the original recording), and stay there.
Scene #1....12-string (filtered) Acoustic intro w/crackling sound (panned 65% right). Use the 'Looper' to record the first approx. 35 seconds. Once 'Record' is armed, the 'Looper' will automatically start recording when the first note is struck.
Scene #2....Acoustic sim. Automatically starts the 'Looper via scene controller #1. Turns down the 'Crackling' sound via scene controller #2.
Scene #3....Scenes 1 and 2 combined. Switch at 1:15. Mutes the 'Looper' block.
Scene #4....Solo. 12-string (filtered) Acoustic sim (panned center) and Acoustic sim together.
Scenes #5 through #8 are not used.